Error code 127
AutoForce: Contact to ground interrupted
Warning at Maestro.Maestro (127-2)
since version 10.06
When does the warning occur?
Only inadequate coulter pressure can be generated, resistance is too great.
Measured forced on sensor is too low over a certain time period.
Seed insertion depth cannot be retained.
Measured forced on sensor is too low over a certain time period.
Seed insertion depth cannot be retained.
Does a Drilling error (drilling drop-out) occur?
Yes!
What to do?
- Increase target value.
- Prepare ground for seed.
- Inspect the parallelogram on the drill unit for freedom of movement.
- Check the basic setting of the machine:
- Parallelogram in middle position?
- Adjust spacer plates on the lift/lower cylinder.
Is there an audible indication?
Single acoustic signal
How is the warning confirmed?
Not possible until error has been rectified
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.