Error code 185
Row module: Downpipe sensor undervoltage
Warning at Drill and Maestro.Drill (185-1)
Maestro (185-2)
since version 10.07
When does the warning occur?
Supply voltage on downpipe sensor too low. Metering accuracy affected.
Does a Drilling error (drilling drop-out) occur?
No.
What to do?
- Check the wiring.
- Check supply voltage on downpipe sensor.
- Replace downpipe sensor if defective.
- A defective downpipe sensor can be deactivated in the machine control until replaced (see operating instructions).
Is there an audible indication?
Single acoustic signal
How is the warning confirmed?
Not possible until error has been rectified
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.