Error code 247
internal error
Alarm at Maistro, Drill and Maestro.Maistro (247-3)
Drill (247-1)
Maestro (247-2)
When does the alarm occur?
* Internal software error. The additional number in the alarm indicates the exact error location of the software:
* 1 = Internal software error
* 2 = Internal software error
* 3 = Internal software error
* 4 = DDOP (device description) is rejected by the TaskController in the terminal
Does a Drilling error (drilling drop-out) occur?
Yes!
What to do?
- Restart the system.
- For error location 4, check the TaskController settings in the terminal or test another terminal.
- For error locations 1, 2 and 3: In case of repeated occurrence, read the configuration from the master job computer using the Service Tool and contact HORSCH Service.
- For an exact analysis, a trace from the IsoBus (PCan View/Explorer or similar) is required.
Is there an audible indication?
single audible signal
How is the alarm confirmed?
Press ESC to confirm
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.