Error code 284
Product/Tower Slave: Power voltage too low
Alarm at Drill.Drill (284-1)
since version 10.17
When does the alarm occur?
* Too low a power voltage was measured at the input of the slave.
Potential faulty behaviour of the slave:
* Product Slave: Metering motors are not activated or have too little power.
* Tower Slave: Row Control flaps are not selected.
Does a Drilling error (drilling drop-out) occur?
Yes!
What to do?
- Check the wiring.
- Check the Extrapower wiring if installed.
- Check supply voltage.
- Optimal operating range 10–16 V on the slave.
Is there an audible indication?
3 successive acoustic signals
How is the alarm confirmed?
Press ESC to confirm
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.