Error code 333
AutoLine: Settings TC incompatible!
Alarm at Maistro, Drill and Maestro.Maistro (333-3)
since version 10.18
Drill (333-1)
since version 10.18
Maestro (333-2)
since version 10.18
When does the alarm occur?
The connected terminal cannot support the current Tramline/AutoLine settings as it only reports Tramline Control Level 1.
=> A tramlines rhythm with half a working width at the start of the field must not be set. This would be a function of Tramline Control Level 2.
=> A tramlines rhythm with half a working width at the start of the field must not be set. This would be a function of Tramline Control Level 2.
Does a Drilling error (drilling drop-out) occur?
Yes!
What to do?
- Check AutoLine/Tramline settings in our AutoLine screen:
- If AutoLine/Tramline Control is to be used with this terminal, then select tramline rhythm without half working width offset.
- Use terminal with at least Tramline Control Level 2. E.g. Horsch Touch 800/1200 or Horsch eos T10 or similar.
Is there an audible indication?
3 successive acoustic signals
How is the alarm confirmed?
Press ESC to confirm
Terms of use
Note: The assistance operations given in the present application may only be carried out observing the safety notes in the operating instructions of the corresponding machine. Compensation claims for damages due to non-observance of the operating instructions are excluded.